Welltech Dialogic SS7 Protocols ISUP - Manual (Page 43)

Dialogic ® SS7 Protocols ISUP Programmer's Manual Issue 15
43
• Call history information
• Call transfer number
• Conference treatment indicators
• Echo control information
• Connected number
• Generic notification indicator
This parameter may be repeated (see Appendix E: ISUP Repeat
Parameters on page 197 ).
• Network specific facility
• Parameter compatibility information
• Redirection number restriction indicator
• UID action indicators
The following optional parameters are supported in ANSI mode only:
• Business group
• Generic number (address)
• Generic digits
• Information indicators
• Network transport
• Notification indicator
This parameter may be repeated (see Appendix E: ISUP Repeat
Parameters on page 197 ).
6.5.23 Release Response
This primitive is used by the application in the case when call clearing was
initiated by the ISUP module. It advises the ISUP module that the application
has finished clearing the switch path and that the circuit is now available for
re-selection.
Whenever a Release indication (REL) is received from the ISUP module, the
application must return a Release response (RLC) to the ISUP module once it
has finished clearing the call. An optional Release request (REL) may also be
returned before the Release response (RLC) – see description of the Release
request primitive.
Message type
RLC (Release Complete Message)
Mandatory parameters
None