Welltech Dialogic SS7 Protocols ISUP - Manual (Page 64)

Section 6 Interface to Application
64
The following optional parameters are supported in ANSI mode only:
• Called party number
• Calling party number
6.6.12 Forward Transfer Indication
This message is issued by ISUP upon receipt of a Forward Transfer message
from the network.
Message type
FOT (Forward Transfer Message)
Mandatory parameters
None
Optional parameters
• Call reference
The following optional parameters are supported in ANSI mode only:
• Cause indicators
6.6.13 Identification Indication
Note: This message is only applicable to ITU-T operation
This primitive is used by ISUP to indicate that the malicious call identification
supplementary service has been requested.
Message type
IDR (Identification Indication Message)
Mandatory parameters
None
Optional parameters
• MCID request indicators
• Message compatibility information
• Parameter compatibility information