Welltech Dialogic SS7 Protocols ISUP - Manual (Page 175)

Dialogic ® SS7 Protocols ISUP Programmer's Manual Issue 15
175
Parameter Value
Nortel RLT
(ANSI) ISUP
API
Length Parameter Name
Hex Dec Hex Dec
Mandatory/
Optional
Parameter
Min Max
Messag
e used
Comments
Charge adjustment 0xea 234 0x1f2 498 Optional 6 6 FAR
Operator information 0xe4 228 0x1f1 497 Optional 12 12 FAR
ANM
Originating line
information 0x70 112 0xea 234 Optional 1 1 FAR,
IAM
Signalling point code* 0x1e 30 0x1e 30 Optional 3 3 FAR
Subsequent number* 0x05 5 0x05 5 Optional 2 17 FAR
Supplementary line
information 0x72 114 0x1f3 499 Optional 3 3 IAM
User-to-user
information* 0x20 32 0x20 32 Optional 1 129 FAR
* Refer to Section 6.7 on page 80 for details.
A.4.2 Nortel RLT (ITU)
Nortel RLT (ITU) Specification: 411- 2131-199 Standard 08.04 August 1998
Wireless Networks DMS-MTX Software Delta for Planners MTX07
Configuration and options
In order to use this feature, ISPGVAR_ITU_RLT must be set in the ‘variant’
field in the Configure Circuit Group Request message (see Section
)
8.2 on
page 126 .
For Nortel RLT(ITU) ISUP, set the circuit group options as recommended for
the ‘ITU’ variant (refer to Appendix D: ISUP Configuration Option Settings on
page 193 ).
Parameters
When this variant is selected, the following Nortel RLT (ITU) ISUP specific
parameters may be used:
Parameter Value
Nortel RLT
(ITU) ISUP
API
Length Parameter Name
Hex Dec Hex Dec
Mandatory
/ Optional
Parameter
Min Max
Message
used
Comments
Signalling point
code*
0x1e 30 0x1e 30 Optional 2 2 FAR
* Refer to Section 6.7 on page 80 .