Appendix c: message type table – Welltech Dialogic SS7 Protocols ISUP User Manual
Page 191
Dialogic
®
SS7 Protocols ISUP Programmer's Manual Issue 15
191
Appendix C: Message Type Table
The following table lists, by message type, all the messages described in this
manual in ascending order.
The message type for the confirmation message is set as described in the
U10SSS, Software Environment Programmer's Manual
, in the paragraph
describing the rsp_req field. Note that only request messages may have an
associated confirmation message. If there is an associated confirmation
message, the confirmation message type is indicated in the confirmation
message column.
Message
Type
Mnemonic
Description
See page
Confirmation
Message
0x0003 MGT_MSG_TRACE_EV
-
0x0008 MGT_MSG_EVENT_IND
-
0x0708 ISP_MSG_CGSC_IND
Circuit Group Supervision Control
Indication
-
0x0709 ISP_MSG_CGSC_CONF
Circuit Group Supervision Control
Confirmation
-
0x070a ISP_MSG_MAINT_IND
-
0x070b ISP_MSG_ERROR_IND
-
0x070c ISP_MSG_CGSS_IND
Circuit Group Supervision Status
Indication
-
0x070d ISP_MSG_OVLD_REQ
-
0x070e ISP_MSG_STATUS
Remote Point Code Status
Indication
-
0x0f16 MGT_MSG_SEL_TRACE
Selective Trace Event Indication
-
0x570f ISP_MSG_S_MAINT_MASK
Send Maintenance Event Mask
Request
0x170f
0x5710 ISP_MSG_S_ERROR_MASK
Send Software Event Mask Request
0x1710
0x5711 ISP_MSG_S_TRACE_MASK
Trace Mask Configuration Request
0x1711
0x5712 ISP_MSG_SET_CUSTVAR
0x1712
0x5713 ISP_MSG_CUSTPARAM
Custom Parameter Configuration
0x1713
0x5714 ISP_MSG_S_SELTRACE_MASK
Send Selective Trace Event Mask
Request
0x1714
0x6111 GEN_MSG_MOD_IDENT
0x2111
0x6704 ISP_MSG_R_RAM
0x2704
0x6705 ISP_MSG_R_GRP
0x2705
0x6706 ISP_MSG_R_CCT
0x2706
0x6710 ISP_MSG_R_STATUS
Read Circuit Group Status Request
0x2710
0x6715 ISP_MSG_R_GRP_DATA
Read Circuit Group Data Request
0x2715
0x6717 ISP_MSG_R_GRPID
Read Circuit Group Identity Request
0x2717
0x7700 ISP_MSG_CONFIG
0x3700
0x7701 ISP_MSG_CNF_GRP
Configure Circuit Group Request
0x3701