Welltech Dialogic SS7 Protocols ISUP - Manual (Page 131)

Dialogic ® SS7 Protocols ISUP Programmer's Manual Issue 15
131
Bit Number Mnemonic Description
12 ISPXGOP_CAUSE_767 If set to 1, the format and usage of the Cause
indicators parameter sent out follows Q.767 i.e.
the Recommendation field and diagnostics are
not included. Also, the Cause indicators
parameter is not sent in an RLC message. If set
to zero, the format and usage of the Cause
indicators parameter sent out follows Q.763.
13 ISPXGOP_DEL_ST If set to 1, removes any ST digit from the end of
the Called party number.
14 ISPXGOP_24PC This option is for future use. It should currently
be set to zero.
15 ISPXGOP_UCIC If set to 1, when the module receives a message
for an unrecognized circuit it will issue an
‘Unequipped CIC’ (UCIC) message and will
recognize receipt of a UCIC message. If set to
zero, the value of the UCIC module option i.e.
ISPF_UCIC will be used to determine if a UCIC
message is recognized.
mngt_id
The module_id of the module for which circuit group supervision indications
and confirmations for this circuit group will be sent. If this field is set to zero
or the length of the parameter area is less than 26 bytes (for backwards
compatibility with previous releases of software) then ISUP will use the
mngt_id supplied in the per-module configuration message and force the
mngt_inst to zero.
mngt_inst
The instance number used in messages sent to the mngt_id module.
user_id
The module_id of the module for which received indications for this circuit
group will be sent. If this field is set to zero or the length of the parameter
area is less than 26 bytes (for backwards compatibility with previous releases
of software) then ISUP will use the user_id supplied in the per-module
configuration message and force user_inst to zero.
user_inst
The instance number used in messages sent to the user_id module.
mtp_id
The module_id of the module for which all MTP-TRANSFER-REQ messages are
sent If this field is set to zero or the length of the parameter area is less than
26 bytes (for backwards compatibility with previous releases of software)
then ISUP will use the mtp_id supplied in the per-module configuration
message and force mtp_inst to zero.
mtp_inst
The instance number used in messages sent to the mtp_id module.