Welltech Dialogic SS7 Protocols ISUP - Manual (Page 145)

Dialogic ® SS7 Protocols ISUP Programmer's Manual Issue 15
145
8.8 Read RAM Request
This message is provided solely for diagnostic purposes to request the
address of the ISUP modules internal ram structure for diagnostic purposes.
Read Request to ISUP
structure MSG
type ISP_MSG_R_RAM (0x6704)
id 0
src Originating module ID
dst ISUP module ID
rsp_req Sending layer's bit set
hclass 0x00
status 0x00
err_info 0x00
len 4
parameters offset 0, size 4: RAM address written by ISUP in response message.
ISUP Response
method By sending a MSG
type 0x2704
status SUCCESS
8.9 Read Circuit Group Request
This message is provided solely for diagnostic purposes to request the
address of the given circuit group structure in the ISUP modules internal ram
structure for diagnostic purposes.
Read Request to ISUP
structure MSG
type ISP_MSG_R_GRP (0x6705)
id gid (Circuit Group Identifier)
src originating module ID
dst ISUP module ID
rsp_req sending layer's bit set
hclass 0x00
status 0x00
err_info 0x00
len 4
parameters offset 0, size 4: Address of circuit group structure written by
ISUP in response message.