Welltech Dialogic SS7 Protocols ISUP - Manual (Page 162)

Section 8 Non-Primitive Interface
162
Status Data Mnemonic Description
60 0x3c cic_mask CCm_HGBS_Unblocking Circuits locally hardware
unblocked by receipt of circuit
group unblocking.
61 0x3d cic_mask CCm_MGBS_Unblocking Circuits locally maintenance
unblocked by receipt of circuit
group unblocking.
62 0x3e cic CCm_BLS_Bad_CGU CGU received for circuits that are
not configured or for an incorrect
range.
63 0xc3f cic CCm_APP_unk_ac98 Unknown '98 AC received
64 0x40 cic CCm_APP_unk_ac2000 Unknown '2000 AC received
65 0x41 cic CCm_APP_len_err_1 Length Error decoding APP -
unable to recover segmentation
indicator
66 0x42 cic CCm_APP_len_err_2 Length Error decoding APP -
unable to recover addresses
67 0x43 cic CCm_APP_ext Invalid extension indicator
68 0x44 cic CCm_APP_seg_ind Invalid segmentation indicator
(either > 9, either not x-1)
69 0x45 cic CCm_APP_seg_new Invalid new segment
70 0x46 cic CCm_APP_seg_unexp Unexpected segment
71 0x47 cic CCm_APP_IE Error recovering IE
8.20 Software Event Indication
This message is issued by the ISUP module to notify system management of
various software events specific to the ISUP module which under normal
operating conditions should not occur. These events may be due to lack of
system resources or errors within the software.
Message Header
structure MSG
type ISP_MSG_ERROR_IND (0x070b)
id See below
src ISUP module ID
dst Management module ID
rsp_req 0x00
hclass 0x00
status Software event code (see below)
err_info Time-stamp
len 0, 2, or 4 bytes (event specific)
Parameter Area
offset 0, size 2: Parameter 1 (optional – dependent on status value) parameters
offset 2, size 2: Parameter 2 (optional – dependent on status value)