Measurement Computing Personal Daq rev.6.0 - Manual (Page 89)

Channel Configuration Window
You can bring up the Channel Configuration Window by using the Configure Channel Settings button (9)
on the Main Control Window toolbar, or by selecting Configure Channels from the Personal DaqViewXL
pull-down menu.
The Channel Configuration Window contains a Control pull-down menu and a 2-button toolbar. The
window displays any one of three tabbed spreadsheets for selecting the type of channel to be configured.
The tabs are labeled Analog Input, Frequency/Pulse Input, and Digital Input/Output.
Channel Configuration Window, Selected for Analog Input Spreadsheet
Toolbar
The Channel Configuration Window consists of two buttons (items 16 and 17) as identified by the previous
figure and the following table.
Button Function
16 Enable Readings
Column
Activates the Channel Configuration Window’s reading column. Does not affect the
recording of data to the destination spreadsheet.
17 Disable Readings
Column
Stops the Channel Configuration Window’s reading column. Does not affect the
recording of data to the destination spreadsheet.
Channel Configuration Window Pull-down Menu
The channel configuration window contains one pull-down menu labeled, Control. This menu provides a
means of enabling and disabling the readings column, as do toolbar items (16 and 17).
Personal DaqViewXL User’s Guide 918596 491-0905, rev 3.0 7