Measurement Computing Personal Daq rev.6.0 - Manual (Page 63)

Meter Pull-Down Menus
The meter windows each have Control and View pull-down menus, as indicated by the following figure.
The functions of these menus can also be implemented by using the meter toolbar buttons.
Meter Pull-Down Menu Options
Meters Configuration Menu
A meters configuration menu (lower left corner of following figure) will appear when you place the mouse
pointer over a meter and click the right-hand mouse button. The menu allows you to access various dialog
boxes for changing parameters for an individual meter, or simultaneously for a group of meters. The steps
for configuring a meter are detailed below.
Note: The Show Peak Hold Indicator / Reset Peak Hold Indicator selections are not an option for Digital
Meters and do not appear on the configuration window for digital meters.
Note: When the Misc., Scale, or Limits dialog box is active, clicking on the "More>>" button causes a
meters extension area to be displayed. This allows you to extend the assigned meter characteristics
to additional meters of the same type. An example of the meters extension box is shown in the
upper right corner of the following figure.
Meter Configuration Menu and Related Dialog Boxes
Personal Daq User’s Manual 989394 Personal DaqView 4-21