Measurement Computing Personal Daq rev.6.0 - Manual (Page 80)

4-38 Personal DaqView 989394 Personal Daq User’s Manual
Chart Setup Wizard, Simple Mode
Chart Setup Wizard, Automatic Setup Options
Setup
Type Group Setup
(for Chart Groups) Chart Setup Channel Setup
Simple 1 group only Up to 16 charts 1 channel per chart
Moderate 1 group only Up to 16 charts Up to 4 overlapping channels per chart
Advanced Up to 64 groups Up to 16 charts per group Up to 4 overlapping channels per chart
Note: The Manual Chart Setup, Create Charts button (above figure) allows you to exit the
Chart Setup Wizard and manually create your chart display without use of the automatic
functions available in Chart Setup Wizard.
Note: Moderate and Advanced modes are only available for use with Personal DaqView Plus.
Automatic Display Setup using the Chart Setup Wizard
The previous figure shows the Simple mode dialog box for Automatic Chart Creation. The following
figures show the Moderate and Advanced mode dialog boxes. These two modes do not apply to the
standard version of Personal DaqView.
Dialog Boxes for Moderate and Advanced Modes of Automatic Chart Creation
It is a simple task to create chart display configurations using the automatic method. The following steps
apply to this feature of Chart Setup Wizard.
1. Select Wizard from the Chart pull-down menu of Personal DaqView’s Chart Display Window.
The Wizard setup window appears.
2. Select the desired mode tab (Simple, Moderate, or Advanced).