Hypertherm HTA Rev 6.00 Install Guide - Manual (Page 98)

86 Installation & Setup Guide
Network Connection
The optional Network feature allows the control to be incorporated directly into an office PC Network
for part allocation. This feature is available on controls Windows XP
® operating systems and requires
a factory supplied Network card to be installed. Please see your control vendor for additional details
on adding this feature.
Network System Requirements:
The Optional Networking feature is approved to work with
Window NT
® Servers
Window NT ® Workgroups
Window 98 ® Workgroups
To Map the control for loading files
Enable the Mapped Network Drive feature at the Special Password Screen.
At the files Screen, press the + Key. Enter the desired mapped drive location.
The control will automatically log on to the system at boot up.