Hypertherm HTA Rev 6.00 Install Guide - Manual (Page 192)

180 Installation & Setup Guide
Drive Connector
The Drive connector is a standard sex circular CPC connector from AMP.
NOTE: For optimum noise immunity, cable shields may be tied externally to the control enclosure.
Drive Mating Connector and Cable
Connector AMP #206837-1
Backshell AMP #206138-1
Sockets (16-18 ga) AMP #66101-3
Cabling: Use Belden # 9501 or equivalent for drive signals
Axes Assignments
Axes Axes
Assignment
1 (X) Transverse or Rail
2 (Y) Transverse or Rail
Drive Pinout
Pin Description
7
X Reference +
6 Y Reference +
9 Reference Common
12 Reference Shield
20 Remote Pause
8 Watchdog Normally Open Contacts
13 Watchdog Common