Hypertherm HTA Rev 6.00 Install Guide - Manual (Page 103)

Section 5: Phoenix Link 91
The following options are available to define what part programs may be viewed at the control.
Show All Files
Enabling this feature allows all file types in the selected parts folder to be viewed at the control. A
checkmark (
√ ) located before this feature indicates that it has been enabled.
Show Extension in Name
This feature allows the user to view the file extension as part of the name at the control. For the file
name “Job123.CNC”, the control would only display “Job123_CNC” in the filename location of the
download screen. The control would display “Job 123” if this feature was not enabled. This feature is
advantageous if more than one file has the same file name with different file extensions is being used.
A checkmark (
√ ) located before this feature indicates that it has been enabled.
Add to Files
The Add to Files feature allows the user to add to the list of acceptable part program types to be
viewed at the control. Up to four file types (extensions) may be added to the default .txt extension. A
checkmark (
√ ) located before a file extension will indicate which file extension will be placed onto
any part file being uploaded to the host.
Remove from Files
The Remove from Files feature allows the user to remove file extensions from the list of acceptable
part program types.