Compuprint 4247-Z03 - Manual (Page 94)

4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
ASCII Configuration
Print Language
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired language
value is displayed.
7. Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
8. Press START or RETURN to exit the Menu. See “Exiting the configuration
menu” on page 39.
Print Quality
When emulation mode is set to 4247, 4202 III XL, or 2381 Personal Printer, you can
set the printer to any of the following values:
v
Fast Draft Quality (Default)
v DP Quality
v DP Text Quality
v Near Letter Quality
v OCR-A
v OCR-B
When emulation mode is set to Epson-FX, you can set the printer to any of the
following values:
v
Fast Draft Quality (Default)
v DP Quality
v Courier
v Gothic
v OCR-A
v OCR-B
Notes:
1. This parameter can be overridden by the computer.
2. Only OCR-A and OCR-B are valid when either OCR-A or OCR-B is selected as
the print language.
To change or check the Print Quality, follow these steps:
1.
Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
ASCII Configuration
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
ASCII Configuration
Print Quality
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
Print Quality is displayed.
78 User's Guide