beautypg.com

Maximum print position (mpp) – Compuprint 4247-Z03 User Manual

Page 89

background image

Maximum Print Position (MPP)

The maximum print position (MPP) equals the number of characters the printer
prints on a line. The default value is 136.

The CPI setting you choose directly influences the MPP value you select. The MPP
and CPI settings determine the length of the print line. The maximum line length
for the printer is 345.44 mm (13.6 in.).

The CPI setting and the line length determine the MPP. Multiply the CPI by the
line length to determine the appropriate MPP:

MPP = CPI x line length (in inches)

If your CPI is:

MPP cannot be greater than:

10

136

12

163

15

204

16.7

227

17.1

233

20

272

Notes:
1.

Setting the MPP larger than the paper width can result in lost data because of
printing on the platen and may damage the platen and the printhead.

2.

This parameter can be overridden by the computer.

To change or check the MPP value, follow these steps:
1.

Press MENU.

2.

Press SCROLL/MICRO or SCROLL/MICRO until the printer displays

CONFIGURATION MENU
ASCII Configuration

3.

Press ENTER.

4.

Press SCROLL/MICRO or SCROLL/MICRO until the printer displays

ASCII Configuration
Maximum Print Position

5.

Press ENTER to display the current value.

6.

Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
MPP is displayed.

7.

Press ENTER.
An asterisk (*) will be displayed in front of the selected value.

8.

Press START or RETURN to exit the Menu. See “Exiting the configuration
menu” on page 39.

Chapter 7. ASCII Configuration

73

This manual is related to the following products: