Printer compatibility 8 (slashed zero) – Compuprint 4247-Z03 User Manual
Page 102
Printer Compatibility 8 (Slashed Zero)
You can set this value to:
Disabled
(Default)
All printed zeros will appear without a slash.
Enabled
All printed zeros will appear with a slash.
To change or check the slashed zero, follow these steps:
1.
Press MENU.
2.
Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
ASCII Configuration
3.
Press ENTER.
4.
Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
ASCII Configuration
Printer Compatibility
5.
Press ENTER.
6.
Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
Printer Compatibility
8 (Slashed Zero)
7.
Press ENTER to display the current value.
8.
Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
Slashed Zero is displayed.
9.
Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
10.
Press START or RETURN to exit the Menu. See “Exiting the configuration
menu” on page 39.
86
User's Guide