Compuprint 4247-Z03 - Manual (Page 81)

Table 13. Supported Print Languages (continued)
Code Page Language
1140 USA/Canada + euro
1141 Austrian/German + euro
1142 Danish/Norwegian + euro
1143 Finnish/Swedish + euro
1144 Italian + euro
1145 Spanish/Spanish Speaking + euro
1146 English (UK) + euro
1147 French plus euro
1148 International 5/Belgian New + euro
1149 Icelandic + euro
Notes:
1. The printer performs a partial reset to put any change to this parameter value
into effect when you exit the Configuration Menu with START or RETURN.
Buffered data will be lost.
2. This parameter can be overridden by the computer.
3. When either OCR-A or OCR-B is selected, the selectable options for CPI and
print quality become fixed at 10 CPI and Near Letter Quality, respectively.
To change or check the print language value, follow these steps:
1.
Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
IPDS Configuration
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
IPDS Configuration
Print Language
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired language
value is displayed.
7. Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
8. Press START or RETURN to exit the Menu. See “Exiting the configuration
menu” on page 39.
Emulation Mode
You can set Emulation Mode to the following values:
v
4247 (Default)
v 4224
v 4230
Chapter 6. IPDS Configuration 65