Compuprint 4247-Z03 - Manual (Page 47)

Adjusting forms
Press SCROLL/MICRO or SCROLL/MICRO to move the form 0.176 mm
(1/144 in.) in the direction of the arrow each time you press the key. If you
continue to hold down the SCROLL/MICRO key, the forms move continuously
until you release the key.
When the printer is at the top of the forms and the SCROLL/MICRO keys are
used, the new forms position is now the top of forms.
The SCROLL/MICRO and SCROLL/MICRO keys replace the forms advance
knob found on other printer products.
Note: If you use these keys when the PROCESSING indicator is blinking, the top
of form position could become misaligned.
Scrolling through categories, parameters, values, and tests
The scrolling functions are available only when the Configuration Menu or Test
Menu is displayed.
Pressing SCROLL/MICRO when the Configuration Menu is displayed changes
the second line of the display to show the previous configuration category,
parameter, or value. Pressing SCROLL/MICRO when the Configuration Menu is
displayed changes the second line of the display to show the next configuration
category, parameter, or value.
Pressing SCROLL/MICRO when the Test Menu is displayed changes the second
line of the display to show the previous test name. Pressing SCROLL/MICRO
when the Test Menu is displayed changes the second line of the display to show
the next test name.
The scroll keys also enable the selection of numeric values. The list of numeric
values starts with the lowest value. When a numeric value is to be entered, use
SCROLL/MICRO
to see the next lower value in the range and SCROLL/MICRO
to see the next higher value. The values are shown on the second line of the
display panel. When the value you wish to select appears, press ENTER.
The scrolling functions are also used during some of the Operator Print Tests. See
Chapter 17, “Using the Operator Print Tests,” on page 143 for more information.
ENTER
ENTER function
The ENTER function is available when the Configuration Menu or Operator Print
Tests Menu is displayed.
Pressing ENTER selects the displayed option.
The Enter function is also used during some of the tests.
Chapter 2. Understanding the operator panel 31