Chapter 7. ascii configuration, Characters per inch (cpi), Chapter 7, “ascii configuration – Compuprint 4247-Z03 User Manual
Page 87
Chapter 7. ASCII Configuration
Printer Compatibility 3 (Automatic Line Feed on
Carriage Return).
Printer Compatibility 4 (Automatic Carriage Return
on Line Feed).
Printer Compatibility 5 (Form Feed Suppression) .
Printer Compatibility 6 (Init)
Printer Compatibility 7 (Condensed Print) .
Printer Compatibility 8 (Slashed Zero)
Printer Compatibility 9 (20 CPI)
This chapter describes the procedures for checking and changing ASCII
configuration parameters for your 4247 printer. The chapter is divided into sections
according to parameter. Refer to the partial table of contents at the beginning of
this chapter for parameter and page listings.
Characters Per Inch (CPI)
You can set the Characters Per Inch (CPI) to any of the following values:
v
10
(Default)
v
12
v
15
v
16.7
v
17.1
v
20
Notes:
1.
It is possible to specify a CPI value that causes the page width (maximum print
position) to exceed the maximum physical page width. If this occurs, the
printer automatically changes the maximum print position to the highest valid
value for the new CPI setting. See “Maximum Print Position (MPP)” on page 73
for more information.
2.
This parameter can be overridden by the computer.
3.
Only 10 CPI is valid when either OCR-A or OCR-B is selected as a print
language.
71