Host fast draft – Compuprint 4247-Z03 User Manual
Page 79
1.
Press MENU.
2.
Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
IPDS Configuration
3.
Press ENTER.
4.
Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
IPDS Configuration
Print Quality
5.
Press ENTER to display the current value.
6.
Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
Print Quality is displayed.
7.
Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
8.
Press START or RETURN to exit the Menu. See “Exiting the configuration
menu” on page 39.
Host Fast Draft
You can set the Host Fast Draft Parameter to the following values:
Enabled
(Default)
If you select Enabled, the highest print speed
(lowest print quality) available through the data
stream is Fast Draft Quality. DP Quality is not
selectable via the data stream.
Disabled
If you select Disabled, the highest print speed
(lowest print quality) available through the data
stream is DP Quality. Fast Draft Quality is not
selectable via the data stream.
To change or check this parameter, follow these steps:
1.
Press MENU.
2.
Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
IPDS Configuration
3.
Press ENTER.
4.
Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
IPDS Configuration
Host Fast Draft
5.
Press ENTER.
6.
Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
Host Fast Draft is displayed on the second line of the display.
7.
Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
8.
Use Start or Return to exit the Menu (see “Exiting the configuration menu” on
page 39).
Chapter 6. IPDS Configuration
63