Compuprint 4247-Z03 - Manual (Page 110)

AutoFeed-XT
This parameter is valid in Epson-FX emulation mode only and instructs the printer
whether the host will determine if an automatic line feed is performed after a
carriage return.
You can set this value to:
Disabled
(Default) The function is determined by the setting of Printer Compatibility 3 –
Automatic Line Feed on Carriage Return.
Enabled The host determines whether an automatic line feed is performed after a
carriage return.
To change or check the AutoFeed-XT setting, follow these steps:
1. Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
ASCII Configuration
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
ASCII Configuration
Parallel Interface
5. Press ENTER.
6. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
Parallel Interface
AutoFeed-XT
7. Press ENTER to display the current value.
8. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
AutoFeed XT is displayed.
9. Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
10. Press START or RETURN to exit the Menu. See “Exiting the configuration
menu” on page 39.
94 User's Guide