Compuprint 4247-Z03 - Manual (Page 77)

To change or check the MPP value, follow these steps:
1.
Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
IPDS Configuration
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
IPDS Configuration
Maximum Print Position
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
MPP is displayed.
7. Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
8. Press START or RETURN to exit the Menu. See “Exiting the configuration
menu” on page 39.
Maximum Page Length (MPL)
You can set the maximum page length (MPL) for the printer from 1–660 lines for 6
LPI and 1–880 lines for 8 LPI. The default value is 66 lines.
MPL equals the number of print lines the printer can print on a page. MPL is the
page length stated in number of print lines.
See the following example to determine how to calculate the MPL.
The LPI and the page length determine the MPL. Multiply the lines per inch by the
page length to determine the appropriate MPL:
MPL = LPI x page length (in inches)
For example, if LPI=6 and page length=254 mm (10 in.), then
MPL = 6 x 10
MPL = 60
Chapter 6. IPDS Configuration 61