Recall factory defaults, Recall factory – Compuprint 4247-Z03 User Manual
Page 70
Recall factory defaults
This function sets all parameter values to the original manufacturing default
values, except Vital Product Data and Printer Address. These settings can only be
changed through their own menu selection.
The printer is shipped with all of the custom sets set to manufacturing default
values and custom set A as the power-on custom set. The Recall Factory Defaults
function does not affect the values saved in custom sets.
Note:
When factory defaults are recalled, a partial reset is automatically performed
when exiting from the configuration menu if the value of at least one of the
parameters that requires a partial reset has been changed. Buffered data will
be lost.
To recall the factory defaults, follow these steps:
1.
Press MENU.
2.
Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
Configuration Storage
3.
Press ENTER.
4.
Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
Configuration Storage
Recall Factory Defaults
5.
Press ENTER.
The printer displays
Recall Factory Defaults
Yes
6.
Press ENTER.
The printer displays
Recall Factory Defaults
Factory Defaults Recalled
7.
Use START or RETURN to exit the Menu. See “Exiting the configuration
menu” on page 39.
54
User's Guide