Compuprint 4247-Z03 - Manual (Page 90)

Maximum Page Length (MPL)
You can set the maximum page length (MPL) for the printer from 1–880 lines,
depending on the LPI setting. The default value is 66 lines.
MPL equals the number of print lines the printer can print on a page. MPL is the
page length stated in number of print lines.
See the following example to determine how to calculate the MPL.
The LPI and the page length determine the MPL. Multiply the lines per inch by the
page length to determine the appropriate MPL:
MPL = LPI x page length (in inches)
For example, if LPI=6 and page length=254 mm (10 in.), then
MPL = 6 x 10
MPL = 60
Note: This parameter can be overridden by the computer.
To change or check the MPL, follow these steps:
1.
Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
ASCII Configuration
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
ASCII Configuration
Maximum Page Length
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
MPL is displayed.
7. Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
8. Press START or RETURN to exit the Menu. See “Exiting the configuration
menu” on page 39.
254 mm
(10 in.)
C7QU5095
Figure 39. Example of LPI and page length
74 User's Guide