Compuprint 4247-Z03 - Manual (Page 145)

Chapter 11. Display Language
The following languages are available for displaying messages on the operator
panel:
Table 16. Display Languages
Language Value
English (Default) 000
Deutsche 001
Français 002
Italiano 003
Español 004
Nederlands 005
Dansk 006
Português 007
Norsk 008
Svenska 009
Suomi 010
Polski 011
Note: The display language changes immediately when you select a new value.
To change or check the display language, follow these steps:
1.
Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
Display Language
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
display language is displayed.
5. Press ENTER.
An asterisk (*) will be displayed in front of the selected value, and the display
language will change.
6. Press START or RETURN to exit the Menu. See “Exiting the configuration
menu” on page 39.
Note: Occasionally the display language may be changed accidentally to a
language that is not understood. To recover to your native language without
saving the display language in a custom set, Turn off and then Turn on the
printer to restore the default setting. The display language should then be
restored to your native language.
129