Compuprint 4247-Z03 - Manual (Page 104)

Alarm Control
You can set the audible printer alarm to either of the following values:
v
Enabled (Default)
v Disabled
Note: Pressing Set Top of Form, and some unit check conditions sound the alarm,
even if the alarm is disabled.
To change or check the alarm control, follow these steps:
1.
Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
ASCII Configuration
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
ASCII Configuration
Alarm Control
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
Alarm Control is displayed.
7. Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
8. Press START or RETURN to exit the Menu. See “Exiting the configuration
menu” on page 39.
88 User's Guide