Compuprint 4247-Z03 - Manual (Page 68)

Power-on custom set
The Power-On Custom Set is the custom set that is used when the printer is turned
on. The Last Used value means the custom set used before the printer was turned
off is to be used as the power-on custom set.
You can change the Power-On Custom Set to:
v
Last Used (Default)
v Custom Set A
v Custom Set B
v Custom Set C
v Custom Set D
v Custom Set E
v Custom Set F
v Custom Set G
v Custom Set H
To change or check the power-on custom set, follow these steps:
1.
Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
Configuration Storage
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
Configuration Storage
Power-On Custom Set
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired custom set for
the new power-on custom set is displayed.
7. Press ENTER.
An asterisk (*) will be displayed in front of the selected custom set.
8. Use START or RETURN to exit the Menu. See “Exiting the configuration
menu” on page 39.
52 User's Guide