Compuprint 4247-Z03 - Manual (Page 115)

Connection Type
You can set Connection Type to:
Local (Default) Printer is connected locally to a host computer.
Remote Printer is connected remotely to a host computer through an external
modem.
To change or check the Connection Type setting:
1.
Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
ASCII Configuration
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
ASCII Configuration
Serial Interface
5. Press ENTER and the printer displays
Serial Interface
Connection Type
6. Press ENTER to display the current value.
7. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
Connection Type is displayed.
8. Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
9. Press START or RETURN to exit the Menu. See “Exiting the configuration
menu” on page 39.
Chapter 7. ASCII Configuration 99