Compuprint 4247-Z03 - Manual (Page 126)

Printer Setup
Continuous Forms Linking
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
Continuous Forms Linking is displayed.
7. Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
8. Press START or RETURN to exit the Menu. See “Exiting the configuration
menu” on page 39.
Form Feed Mode
You can set Form Feed Mode to either of the following values:
v
Not Active In Ready State (Default)
v Active In Ready State
Selecting Active in Ready State makes the FORM FEED key active when the
printer is ready and no job is processing, so that when pressed, a form feed will be
performed and the printer will return to the ready state.
The printer does not have to be not ready before pressing FORM FEED if you
change the value to Active in the ready state.
To change or check the form feed mode:
1.
Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
Printer Setup
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
Printer Setup
Form Feed Mode
5. Press ENTER to display the current value.
6. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
form feed mode is displayed.
7. Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
8. Press START or RETURN to exit the Menu. See “Exiting the configuration
menu” on page 39.
Controlling Tear Off Operations
When a path switch is requested and the top-of-forms is at the print line, the Park
operation will begin automatically. No user intervention is required. In all other
cases, user intervention is required. The message ‘091 FANFOLD PARK... ’ or ‘092
FANFOLD EJECT...’ appears on the operator panel display.
110 User's Guide