Operating and service clearance, Physical dimensions and minimum clearances, Weight – Compuprint 4247-Z03 User Manual
Page 186: Power consumption
Operating and service clearance
You should provide adequate space for cooling air, and for operating or
maintaining the printer. This is also helpful if you will occasionally change the
controller board.
Physical dimensions and minimum clearances
Dimensions
Standard
Width:
720 mm (28.35 in.)
Depth:
400 mm (15.75 in.)
Height:
350 mm (13.78 in.)
Clearances
Standard
Top:
280 mm (11.0 in.)
Front:
450 mm (18.0 in.)
Rear:
450 mm (18.0 in.)
Left:
200 mm (9.7 in.)
Right:
200 mm (9.7 in.)
Weight
CAUTION:
<2-82> The 4247 Model Z03 printer weighs 33 kg (73 lb). Two
persons are required to lift it.
CAUTION:
<2-81> The 4247 Model Z03 printer has an optional printer
pedestal. If the printer is installed on any other stand or
surface, this stand or surface must support the printer weight
of 33 kg (73 lb) and withstand the print action vibration.
Power consumption
Category
115 V ac
60 Hz
230 V ac
50 Hz
Maximum (Peak)
240 Watts
230 Watts
Operating (Maximum
Typical)
160 Watts
155 Watts
Power Saver Mode*
23.5 Watts
22.5 Watts
Idle (Off Mode)
0.1 Watts
0.2 Watts
*Power Saver timeout is 22 seconds.
170
User's Guide