beautypg.com

Parallel interface, Interface type, Input buffer size – Compuprint 4247-Z03 User Manual

Page 108: Parallel interface interface type

background image

Parallel Interface

Interface Type

This parameter allows you to set the system interface for the parallel attachment.
You can set Interface Type to either of the following values:
v

PC Parallel

(Default)

v

1284 Parallel

To change or check the Interface Type:

1.

Press MENU.

2.

Press SCROLL/MICRO or SCROLL/MICRO until the printer displays

CONFIGURATION MENU
ASCII Configuration

3.

Press ENTER.

4.

Press SCROLL/MICRO or SCROLL/MICRO until the printer displays

ASCII Configuration
Parallel Interface

5.

Press ENTER.

6.

Press SCROLL/MICRO or SCROLL/MICRO until the printer displays

Parallel Interface
Interface Type

7.

Press ENTER to display the current value.

8.

Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
Interface Type is displayed.

9.

Press ENTER.
An asterisk (*) will be displayed in front of the selected value.

10.

Press START or RETURN to exit the Menu. See “Exiting the configuration
menu” on page 39.

Input Buffer Size

This parameter allows you to select the size of input buffer to be used. The
following values are:
v

256

v

2K

v

12K

v

32K

(Default)

v

64K

v

128K

To change or check the Input Buffer Size:

1.

Press MENU.

2.

Press SCROLL/MICRO or SCROLL/MICRO until the printer displays

CONFIGURATION MENU
ASCII Configuration

3.

Press ENTER.

92

User's Guide

This manual is related to the following products: