BrightSign BrightAuthor User Guide v.4.1.1 - Manual (Page 145)

137 Chapter 9 – Customizing Presentations
5. Once the scan is complete, the channel settings will be written to the internal registry of the player (i.e. the non-
removable storage). You can now use the RF In state to tune to any virtual channels that were detected in the
channel scan.
Publishing Channel Scan Results
If you are connecting multiple XD1230 players to the same cable source, you can transfer the results of a channel scan
from one player to another during the setup process.
1. After performing a channel scan, reinsert the SD card or USB drive into your PC.
2. In BrightAuthor, navigate to
Tools > Setup BrightSign Unit.
3. Specify device settings as desired (see Chapter 2 – Setting up BrightSign Units for more details).
4. Under RF Channel Scan Data (optional), click browse and locate the “ScannedChannels.xml” file in the SD card
or USB drive directory. Click Open.
5. Publish the setup files to the player as outlined in Chapter 2. The player will now have the same channel
configuration as the original XD1230.
Presentation Tree View
The Presentation Tree View feature allows you to view a presentation as a set of expandable/collapsible zones, states,
events, and commands. You can use this feature to easily navigate all state information in a presentation without double-
clicking numerous icons and navigating through tabs. You can access this feature by navigating to
File > View
Presentation Tree.