BrightSign BrightAuthor User Guide v.4.1.1 - Manual (Page 130)

122 Chapter 8 – Publishing Presentations
• Different: The update will only be applied if the version of the .bsfw update file does not match the
current firmware version of the player. The file is not deleted after the update process is completed.
• Newer: The update will not be applied if the current firmware version of the player is newer than the
version of the update file. The file is not deleted after the update process is completed.
• Save: The .bsfw update file is not deleted after the update is applied. The device will only reboot once
the storage device containing the update file is removed.
5. Publish the presentation:
a. Under Simple File Networking Parameters, click Set Parameters.
b. Under Unit Configuration:
• URL for web folder: Type the URL for your web folder. This
must match the URL you entered when setting up your
device for Simple File Networking.
• Content Check Frequency: Use the dropdown list to specify
how often you want the player to connect to the server to
check for content and scheduling updates.
• (Optional) Simple File Networking Authentication: Enables
digest authentication between the BrightSign player and the
web server.
• (Optional) Enable basic authentication: Passes credentials
to the web server in unsecured packets that are easily
readable by others. Use this option only if it is absolutely
required by the configuration of your web server.
• (Optional) Limit content downloads: Check this box and use
the dropdown lists beside Start of range and End of range
to specify the times during the day when content can be
downloaded.
c. (Optional) Under Logging, check any of the following boxes to
enable the corresponding logs: