BrightSign BrightAuthor User Guide v.4.1.1 User Manual
Page 139
131
Chapter 9 – Customizing Presentations
•
Audio Mixing: Sends the stereo, left-only, or right-only audio signal.
•
Image mode: Use the dropdown list to specify a setting for images.
Note: This option also appears when editing Images zones, but not when editing Video Only zones.
o Center Image: Centers the image without scaling. This may result in cropping if the image is too large.
o Scale to Fit: Scales the image to fit the zone. The image is displayed as large as possible while keeping the
correct aspect ratio.
o Scale to Fill and Crop: Scales the image to completely fill the zone while maintaining the aspect ratio.
o Scale to Fill: Scales the image to fill the zone without maintaining the aspect ratio.
•
Initial volume (Video): Sets the initial volume for audio files (0-100).
•
Initial volume (Audio): Sets the initial volume for video files (0-100).
•
Minimum Volume: Sets the minimum volume for the zone (0-100).
•
Maximum Volume: Sets the maximum volume for the zone (0-100).
Note: The Maximum Volume setting will be overridden by other volume settings in a presentation, including the Initial
Volume setting for the zone and volume commands attached to events or states.
4K1042, 4K1142, XD1032, XD1132, XD1030, XD1230, LS422
•
View mode: Use the dropdown list to specify a setting for videos.
o Scale to fit: Scales the video to fill the screen without maintaining the aspect ratio. The video may appear
stretched.
o Letterboxed and centered: Centers the video and adds black borders on the top and bottom. The aspect ratio
is maintained.
o Fill screen and centered: Centers the video and fills the screen. The aspect ratio is maintained.
•
Audio Output: Enables or disables the Analog, HDMI, and SPDIF audio outputs for the zone.
o Pass through: Supplies the un-decoded audio signal through the HDMI/SPDIF connector. Use this option if the
zone audio (for example, AC3 Dolby Digital) is being decoded on an external device.
o Stereo: Supplies the decoded audio signal through the HDMI/SPDIF connector.
•
Audio Mixing: Sends the stereo, left-only, or right-only audio signal.
•
Image mode: Use the dropdown list to specify a setting for images.