ATEIS DIVA8G2 - Manual (Page 88)

DIVA system 88
© 2012 ATEÏS
Status POWER EVAC FAULT BUSY HOLD
Press Event Select Key - - - - Continuous
Using selected zones - - - Continuous Continuous
Status TALK
Press talk button
The LED blinks when the pre-chime is playing.
When the microphone's used, the LED continuously lights.
4.2.2.4 Characteristics
Case
Dimension = 105mm (W) x 190mm (L) x 50mm (H).
Weight = 0.7Kg.
Color = RAL7035.
Goose-neck length with microphone = 300 mm
Power
Item Voltage Current Consumption Comment
DC Input 18V~26V, Typical 24V 120mA -
Microphone Output
Maximum level = 6dBu.
Output Impedance = 100Ohm.
THD @ 1kHz < 1%.
Bandwidth @ -3dB = 100Hz ~ 18kHz.
Front Panel Speaker
Impedance = 4Ohm.
Maximum Power @ 1kHz = 1W.
THD @ 1kHz < 1%.
Bandwidth @ -3dB = 200Hz ~ 8kHz.
Cable length
100m(control and power on the same cable)
900m(when power line connects to junction box).
Comes standard with Junction box (JB) and CAT5 cable (1.5)
4.2.2.5 Configuration
As described briefly in the External Device - PSM chapter, The PSM8 is a 10 keys call station on which
8 are programmable with microphone, integrated loudspeaker and buzzer. It can be used with either
IDA4(X)(M)(s) or DIVA8M. It is possible to add up to 11 extensions to the PSM8 increasing
programmable keys number to 96. In order to use a PSM microphone with DIVA, simply drag and drop
the PSM microphone from the
Design Component Section to the master window.