ATEIS DIVA8G2 User Manual
Page 67
Product Features
67
© 2012 ATEÏS
Set Address & Port
From the SETTING MENU:
Use arrow keys to choose topics
o
MAC ADDRESS (User level 4 required)
In the world of computer networking, there is one common way to set an quasi-unique identifier
to a network device.
This is the MAC address (Media Access Control Address). This number act like a name for one
particular network device. Note: If it's changed, DIVA can't connect to network.
To see the MAC address just follow these steps:
From the main MENU:
Choose READ MAC ADDRESS.
press OK, the MAC Address number is displayed.
Press ESC to go out of the menu.
To change the MAC address just following these steps:
From the SETTING MENU:
Press OK.
Enter the address value using arrow keys and +/- keys, it displays 12 numbers.
Press OK.
o
IP ADDRESS (User level 3 required)
The following steps show how to change IP Address:
Press OK.
Enter the IP address value using arrow keys and +/- keys. Default address is
192.168.100.100.
Press OK.
You will be asked for validation "REBOOT VALIDATE". Note: after each change in the
Ethernet settings, the DIVA system need to reboot.
If yes, press OK.
If no, press ESC.
o
SUBNET ADDRESS (User level 3 required)
Press OK.
Enter the subnet mask value using arrow keys and +/- keys. Default mask is
255.255.255.000.
Press OK.