Verify diva versions – ATEIS DIVA8G2 User Manual

Page 205

Text mode
Original mode

System Functionality

205

In this window you can enable DHCP by ticking the corresponding check box

Enter the IP address value

Enter the Subnet Mask value

Enter the Gateway value

Click OK

If not already logged in, it will prompt you to enter an username and password

System will reboot automatically

Note: you have to keep in mind that setting TCP/IP parameters not related to the one set for your
network card, could lead to communication problems.

5.5.2

Verify Diva Versions

Before checking the DIVAs firmware versions, you should connect to the machine trough TCP/IP, see

How to Search Device

chapter.

In order to verify that the current software correspond to the DIVAs' units firmware, please follow the next
steps:

Go in the menu "Help"

choose "Version"

Then the following window should pop up: