Artesyn MVME51005E SBC Installation and Use (July 2014) - Manual (Page 44)

PPCBug Firmware
MVME51005E Single Board Computer Installation and Use (6806800A38D) 46
3.4.1 CNFG - Configure Board Information Block
Use this command to display and configure the Board Information Block, which is resident
within the NVRAM. This data block contains various elements detailing specific operational
parameters of the MVME5100. The structure for the board is shown in the following example.
The Board Information Block parameters shown above are left-justified character (ASCII)
strings padded with space characters.
The Board Information Block is factory-configured before shipment. There is no need to
modify block parameters unless the NVRAM is corrupted.
Refer to the PPCBug Firmware Package User's Manual, listed in Appendix D, Related
Documentation for a description of CNFG and examples.
3.4.2 ENV - Set Environment
Use the ENV command to view and/or configure interactively all PPCBug operational
parameters that are kept in Non-Volatile RAM (NVRAM).
Board (PWA) Serial Number = MOT00xxxxxxx
Board Identifier = MVME5100
Artwork (PWA) Identifier = 01-W3518FxxB
Artwork (PWA) Identifier = 01-W3518FxxB
MPU Clock Speed = 450
Bus Clock Speed = 100
Ethernet Address = 0001AF2A0A57
Primary SCSI Identifier = 07
System Serial Number = nnnnnnnn
System Identifier = Artesyn MVME5100
License Identifier = nnnnnnnn