2 channel cross-connect for bcm5709s, Figure 4-10, Base channel cross connect – Artesyn ATCA-F125 Installation and Use Guide (April 2014) User Manual

Page 87

Text mode
Original mode

Functional Description

ATCA-F125 (6873M Artwork) Installation and Use (6806800J94J)

The BCM5709S uses an external SPI flash device to store microcontroller boot code,
configuration data, MAC addresses, etc. A 1 Mbit Atmel AT45DB011 device will be used for this
purpose.

4.10.2 Channel Cross-Connect for BCM5709S

The channel cross connect scheme for the BCM5709S is shown below in the following two
figures.

Figure 4-10 Base Channel Cross Connect

This manual is related to the following products:

ATCA-F125 Installation and Use Guide (August 2014) ATCA-F140 Installation and Use (July 2014) ATCA-F140 Installation and Use (May 2014) ATCA-F140 Installation and Use (June 2014) ATCA-F140 Installation and Use (September 2014)