Artesyn ATCA-F125 Installation and Use Guide (April 2014) - Manual (Page 107)

U-Boot
ATCA-F125 (6873M Artwork) Installation and Use (6806800J94J) 107
5.7 Linux Devices
The following table lists all predefined Linux character devices and the respective memory
blocks which they are assigned to.
Table 5-2 Linux Devices
Linux Device Name Content Memory Area Hardware Device
/dev/mtd0 Kernel image 0xE0000000 -
0xE05FFFFF Active boot flash
/dev/mtd1 Empty 0xE0600000 -
0xE1EFFFFF Active boot flash
/dev/mtd2 Kernel DTB 0xE1F00000 -
0xE1F1FFFF Active boot flash
/dev/mtd3 U-boot parameters 0xE1F00000 -
0xE1F1FFFF Active boot flash
/dev/mtd4 U-Boot image 0xE2000000 -
0xE25FFFFF Active boot flash
/dev/mtd5 Kernel image 0xE2000000 -
0xE25FFFFF Stand-by boot flash
/dev/mtd6 Empty 0xE2600000 -
0xE3EFFFFF Stand-by boot flash
/dev/mtd7 Kernel DTB 0xE3F00000 -
0xE3F1FFFF Stand-by boot flash
/dev/mtd8 U-Boot boot
parameters 0xE3F40000 -
0xE3F5FFFF Stand-by boot flash
/dev/mtd9 U-Boot image 0xE3F80000 -
0xE3FFFFFF Stand-by boot flash
/dev/mtd10 FPGA - -