4 rear transition modules – Artesyn ATCA-F125 Installation and Use Guide (April 2014) User Manual
Page 29
Hardware Preparation and Installation
ATCA-F125 (6873M Artwork) Installation and Use (6806800J94J)
29
2.4
Rear Transition Modules
If applicable, install a rear transition module. For more information, see the RTM-ATCA-F125
Installation and Use. You can obtain an electronic copy of the manual from our web site:
1.
.artesyn.com/computing
2. Under Resources, click Technical Documentation.
3. Enter the publication number or the complete name of the product in the Search box.
Refer to
Appendix B, Related Documentation, on page 119
for the list of related documents.
The RTMs are not hot-swappable. Before installation, make sure that no front blade is
installed in its respective slot, or that the front blade is powered-down. For further details
about the RTM installation, refer to the installation and use guide of the respective RTM.
Damage of the Product and Additional Devices and Modules
Incorrect installation or removal of additional devices or modules damages the product
or the additional devices or modules.
Before installing or removing additional devices or modules, read the respective
documentation and use appropriate tools.