Artesyn ATCA-F125 Installation and Use Guide (April 2014) - Manual (Page 38)

Hardware Preparation and Installation
ATCA-F125 (6873M Artwork) Installation and Use (6806800J94J) 38
3. Wait for the blue LED to perform short blinks, and then glow steadily.
4. Once the blue LED glows steadily, gently pull the AMC module handles outwards to
disconnect the module from the AMC connectors. Continue to gently slide the module
outwards along the guide rails.
5. Install the filler panel.
Data Loss
 Removing the blade with the blue LED still blinking causes data loss.
 Wait until the blue LED is steadily lit, before removing the blade.