Artesyn ATCA-F125 Installation and Use Guide (April 2014) - Manual (Page 20)

Introduction
ATCA-F125 (6873M Artwork) Installation and Use (6806800J94J) 20
NOTE: This manual covers the ATCA-F125-14S product. It also covers ATCA-F125-TCLK3 and
ATCA-F125-TCLK3E products manufactured with 6873M PWB artwork.
For 6859G PWB artwork documentation, refer to ATCA-F125 Installation & Use manual
6806800J94B. The PWB artwork may be identified by the assembly number, which is marked
near the serial number as shown in
Figure 1-2 on page 21 .
1.4.1 Blade Accessories
The following table lists the blade accessories that were available as of the time of writing this
manual. Consult your local sales representative for the availability of further accessories.
Table 1-4 Blade Accessories - Ordering Information
Accessory Description
RTM-ATCA-F125 RTM for the ATCA-F125 with SFP and SFPP receptacles
SFP-MM-SX-LC 1G Single Form Factor (SFP) module - 850NM, SX, LC connector
SFP-CO-RJ-45 1G copper Single Form Factor (SFP) module - RJ-45 connector
SFPP-MM-SR-LC 10 G Single Form Factor Plus (SFPP) module - 850NM, SR, LC connector
SFPP-SM-LR-LC 10G Single Form Factor Plus (SFPP) module -1310NM, LR, LC connector
SFPP-CO-RJ-45-3M 10G copper Single Form Factor Plus (SFPP) modules with molded cable - 3M
CABLE-OPT-F102-5M Optical cable for multi-mode, SFP and SFPP connections (5M)
PRAMC-7211 AMC CPU blade with Intel© Core2Duo 64B @ 1.5GHZ, 2G DDR2 & mid-size
SA-BBS-721X PRAMC-721X, BBS only, BINARY RPMS, PNE 2.X, CD
SA-BBS-WR2X-721X PrAMC-721x, BBS binary RPMs, Eval kernel+runtime, PNE LE 2.x, CD