Artesyn ATCA-F125 Installation and Use Guide (April 2014) - Manual (Page 127)

Safety Notes
ATCA-F125 (6873M Artwork) Installation and Use (6806800J94J) 127
SFP/SFP+ Modules
Personal Injury and Damage of the RTM and SFP/SFP+ Modules
Installing and using SFP/SFP+ modules which are not fully certified and which do not meet all
relevant safety standards may damage the RTM and the SFP/SFP+ modules and may lead to
personal injury.
Only use and install SFP/SFP+ modules which are fully certified and which meet all relevant
safety standards.
Personal Injury
Optical SFP/SFP+ modules may be classified as laser products. When installing and using any of
these SFP/SFP+ modules, the regulations which correspond to the respective laser class apply
to the whole RTM. Not complying to these regulations may lead to personal injury.
When installing and using optical SFP/SFP+ modules which are classified as laser products,
make sure to comply to the respective regulations.
Eye Damage
Optical SFP/SFP+ modules may emit laser radiation when no cable is connected. This laser
radiation is harmful to your eyes.
Do not look into the optical lens at any time.
SFP/SFP+ Module Damage
The optical port plug protects the optical fibres against dirt and damage. Dirt and damage can
render the SFP/SFP+ module inoperable.
Only remove the optical plug when you are ready to connect a cable to the SFP/SFP+ module.
When no cable is connected, cover the port with an optical port plug.
Battery
Data Loss
Installing another battery type than the one that is mounted at product delivery may cause
data loss since other battery types may be specified for other environments or may have a
shorter lifetime.
Only use the same type of lithium battery as is already installed.