Hardware preparation and installation – Artesyn ATCA-F125 Installation and Use Guide (April 2014) User Manual
Page 33
Hardware Preparation and Installation
ATCA-F125 (6873M Artwork) Installation and Use (6806800J94J)
33
6. Fully insert the blade and lock it to the shelf by squeezing the lever and the latch together
and turning the handles towards the face plate.
If your shelf is powered, as soon as the blade is connected to the backplane power pins, the
blue LED is illuminated.
When the blade is completely installed, the blue LED starts to blink. This indicates that the
blade announces its presence to the shelf management controller.
If you feel that you need an abnormal amount of force during blade insertion to insert the
blade into the slot, please extract the blade, then carefully inspect the blade and slot for
problems to prevent damage.
If an RTM is connected to the front blade, make sure that the handles of both the RTM and the
front blade are closed in order to power up the blade’s payload.