3 mechanical data, 4 ordering information, 3 mechanical data 1.4 ordering information – Artesyn ATCA-F125 Installation and Use Guide (April 2014) User Manual
Page 19: Table 1-2, Mechanical data, Table 1-3, Blade variants - ordering information, Introduction
Introduction
ATCA-F125 (6873M Artwork) Installation and Use (6806800J94J)
19
1.3
Mechanical Data
The following table provides details about the blade's mechanical data, such as dimensions and
weight.
1.4
Ordering Information
The following table lists the blade variants that were available as of the time of writing this
manual. Consult your local Artesyn Embedded Technologies sales representative for the
availability of further variants.
Table 1-2 Mechanical Data
Data
Value
Dimensions
30 mm x 351 mm x 312 mm (8U form factor)
Weight
2.3 kg
Table 1-3 Blade Variants - Ordering Information
Product Name
Description
PWB Artwork/Assembly No.
(See NOTE)
ATCA-F125-14S
10G ATCA switch blade with (1) AMC site and
optional SATA storage, ETH between
CPU/Base interface
6873M / 0106873Mxxx
ATCA-F125
10G ATCA switch blade with one (1) AMC site
and optional SATA storage
6859G / 0106859Gxxx
ATCA-F125-TCLK3
10G ATCA switch blade with one (1) AMC
site, optional storage and telecom CLK
Stratum 3
6873M / 0106873Mxxx
ATCA-F125-TCLK3E
10G ATCA switch blade with one (1) AMC
site, optional storage and telecom CLK
Stratum 3E
6873M / 0106873Mxxx