Artesyn ATCA-F125 Installation and Use Guide (April 2014) - Manual (Page 83)

Functional Description
ATCA-F125 (6873M Artwork) Installation and Use (6806800J94J) 83
The PCMULK, PCDRLK, PLOSB and LASI signals from each BCM8747 port are connected to the
FPGA to allow them to be monitored by software. The PLOSB and LASI signals can also generate
an interrupt to the service processor.
The SFP+ module receptacles are designed to support standard SFP modules, SFP+ modules as
well as direct attach copper SFP+ cables. The following table lists the SFP+ module types that
have been tested and verified for use on the ATCA-F125.
Figure 4-8 SFP+ Module Status and Control Interface
Table 4-5 Tested SFP+ Modules
Artesyn Embedded
Technologies Part
Number
Vendor Part Number Vendor Description
SFPP-MM-SR-LC FTLX8571D3BCL Finisar 10Gb/s 850nm
multimode SFP+
transceiver
SFPP-SM-LR-LC FTLX1471D3BCL Finisar SFP+ 10GB LR Optical
Module
SFP-CO-RJ-45 DM7-41-R-L Methode COPPER SFP (MODULE,
SFP, RJ45 CONNECTOR
SFP-MM-SX-LC AFBR-57L5AZP Avago SFP optical module