Doremi ShowVault / IMB - Manual (Page 96)

____________________________________________________________________________________
SHV.OM.001663.DRM Page 96 of 276 Version 1.7
Doremi Labs
7.6.4 Networking Configuration Tab
The second tab displays the networking configuration (Figure 122).
Figure 122: Device Controller GUI - Projector Device Added

The following networking configuration information is displayed:
◦ IP
◦ Mask (sub-network mask)
◦ Gateway

The user can also modify the network configuration by clicking on the "Change" button.

"Root" privileges are required to change the networking parameters. Now it will be
possible to change the IP, mask, or Gateway.

Click Ok to confirm the changes. These changes take immediate effect and they expire
when you reboot the unit, being replaced by the default networking configuration.

You can save these settings as "default" by pressing the Save button. These
configurations will be effective even after a reboot.

To restore the networking configuration to factory default, click on the Restore button.
The factory default settings are:
◦ IP
◦ Mask
◦ Gateway

Make sure to click the "Save" button when finished setting the network configuration.
Status
Indicator