Doremi ShowVault / IMB - Manual (Page 245)

____________________________________________________________________________________
SHV.OM.001663.DRM Page 245 of 276 Version 1.7
Doremi Labs
Figure 321: Device Manager
Figure 322: HFR 3D Primary Projector

Add the Secondary Projector (LD) by clicking the Add button (Figure 323).

Set the Secondary Projector (LD) Configuration:
o Set the Identifier: LD + name of the projector.
o Select the Projector Model from the drop-down.
o Specify the Head IP of the projector.
o Select No for Primary projector.
o Select Yes for Dual IMB.
o For 2D presentations, select Full from the Display drop-down.
 Note: For HFR setups, select Right from the Display mode drop-down
(Figure 324).
Add
button
Save
button