Doremi ShowVault / IMB - Manual (Page 238)

____________________________________________________________________________________
SHV.OM.001663.DRM Page 238 of 276 Version 1.7
Doremi Labs
Figure 316: Insert Macro Window
Figure 317: CPL and Macro Added to the Playlist

Go to the Playback tab and set the Mode to Play using the drop-down box. Chase Mode
will only work with the playback mode set to Play (this applies only to the slave side;
the master side can be any setting because the slave will just chase whatever the time
code is coming from that unit). See Figure 318 for more information.

Press Pause to Load the CPL and queue it for chase playback.

Load the desired CPL on the Master ShowVault and press Play, or start the embedded
Timecode source and the slave IMB will start chasing.
Chase Macro
in SPL